Aluminum Pushbutton Enclosures
- Details
- Category: News
- Published on Friday, 18 January 2013 05:26
- Hits: 1447
Type TE Aluminum Pushbutton Enclosures
A new line of heavy-duty diecast aluminum enclosures for standard 22.5mm Ø control devices such as pushbuttons, selectors, pilot lights, emergency stop buttons, etc.. Available with one, two, three or four in-line holes. Ingress protection IP65 (similar to NEMA 4X).
The new "TE" line of enclosures features:
- Body of diecast aluminum, extremely resistant to impact and corrosion, protected with epoxy powder coating (standard colour: black base / cover light grey);
- Spacing between centers of holes = 50mm which allows for easy assembly of any type of 22.5mm control device;
- Available from stock with 1-, 2-, 3- or 4-holes, for immediate delivery;
- For each control device, one or two contacts can be mounted with a standard metal collar, or alternately reverse-mounted on the base of the enclosure;
- Each enclosure comes with two M20 threaded cable entries, one of them equipped with a protection plug; adapters M20 to 1/2"NPT are available as an accessory;
- Mounting of the enclosure by means of 4 corner holes, Ø 6mm;
- cULus certified.
Click here for specifications, part numbers and dimensions, as well as accessories and related products.
