NewsStrap Clamps
- Details
- Category: News
- Published on Wednesday, 08 February 2023 11:00
- Hits: 817
A simple accessory that finds numerous applications in mechanical construction, electrical cabinets and installations, HVAC, conveyors, signalization.... Strap clamps (also known as P-CLIPS) are simple, cost-effective devices for efficiently securing wires, cables, pipes and small tubing and metal rods.
DIN Mounted Power Supplies
- Details
- Category: News
- Published on Thursday, 01 December 2022 09:28
- Hits: 878
The new, compact FLEX series of power supplies features 1, 2, and 3-phase input up to 600W with current rating ranging from 2A to 25A and a ‘Power Boost’ function allowing to the power supply to reach 150% of the rated current for up to 3 minutes.
The FLEX series offers three types of short-circuit protection (Hiccup Mode, Manual Reset and Continuous Output Mode).
Are you familiar with ASI?
- Details
- Category: News
- Published on Wednesday, 02 November 2022 15:49
- Hits: 625
ASI, or AS-I, AS-Interface (Actuator Sensor Interface) technology was developed in the 1980s as a solution for parallel cabling of actuator and sensors in factory automation and process technology.
32A Manual Motor Starters (2)
- Details
- Category: News
- Published on Wednesday, 02 November 2022 12:10
- Hits: 108
Along with the popular family of 25A manual modular motor starters, ITC now offers the improved 32A Ex9S32 series manufactured by NOARK. With the right configuration, they can be used in Type E (self-protected) and Type F applications.
The 32A Starters provide in a single, compact DIN rail mounted module:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- motor isolation
- manual motor control
- Magnetic and Thermal protection
- branch-circuit short circuit protection
- A wide range of accessories for mounting, signalling, remote control, connecting, etc.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
32A Manual Motor Starters
- Details
- Category: News
- Published on Wednesday, 02 November 2022 12:10
- Hits: 714
Along with the popular family of 25A manual modular motor starters, ITC now offers the improved 32A Ex9S32 series manufactured by NOARK. With the right configuration, they can be used in Type E (self-protected) and Type F applications.
The 32A Starters provide in a single, compact DIN rail mounted module:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- motor isolation
- manual motor control
- Magnetic and Thermal protection
- branch-circuit short circuit protection
- A wide range of accessories for mounting, signalling, remote control, connecting, etc.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
AMTE Assembly Tables
- Details
- Category: News
- Published on Wednesday, 02 November 2022 12:00
- Hits: 967
New versions of the popular AMTE family assembly tables are now available. These tables are a great solution for assembling and wiring a control panel or back plate in a safe, practical, ergonomic manner.
The AMTE tables come with an adjustable swivel frame, which holds a panel or back plate. The frames with optional extensions have a maximum surface area of 2121 x 2045mm (83.5 x 80.5”) and have a maximum load of 400kg (908 lb).
Stainless Steel Cable Glands
- Details
- Category: News
- Published on Wednesday, 02 November 2022 11:37
- Hits: 594
ITC now offers stainless steel cable glands manufactured by BIMED, with UL approvals and NEMA TYPE 4X ratings. They are even more resistant to corrosion than cable glands made of plastic or brass. This makes them exceptionally suited for the heaviest of applications that do not require a Hazardous Location rating.
Use stainless steel cable glands in harsh environments and extreme temperatures. These glands are available in Metric and NPT, in standard and non-standard sizes.
New Cable Glands Catalog
- Details
- Category: News
- Published on Wednesday, 02 November 2022 11:00
- Hits: 702
Our popular Cable Glands catalog has been updated. The catalog features ITC’s extensive range of liquid-tight, strain relief cable glands (cord connectors) and accessories, including locknuts, sealing washers, plugs, etc. These cable glands suit most industrial applications such as switchgear manufacturing, automation and control panels, machine tools, instrumentation, and anywhere else a reliable, liquid-tight and pull-resistant seal is required when running cables and wires from an enclosure to the external environment.
DINLET, the DIN Rail mounted AC outlet
- Details
- Category: News
- Published on Tuesday, 01 November 2022 18:00
- Hits: 2315
Rotary Cam Switches
- Details
- Category: News
- Published on Wednesday, 31 August 2022 16:00
- Hits: 647
ITC offers any Rotary Cam Switch to suit your needs – on-off, changeover, reversing, step (or selector), instrument meters, star/delta, single-phase starter, binary code, stop-start and custom switches!
These switches are designed to meet the most stringent requirements for application in control panels, command consoles, machinery enclosures, automation, manufacturing, industrial processing, laboratories, conveyors and moving equipment, etc. These rotary cam switches are built in accordance with all applicable international Standards and are certified by UL and CSA for the North American market. They are economical, compact in size, simple to install, wire and operate, and now available from stock in Canada.
We have put all these switches in a new, combined and convenient catalog.
Download the Rotary Cam Switch Catalog.
