Punch/Die Sets for Rectangular Connectors
- Details
- Category: News
- Published on Tuesday, 15 October 2019 10:00
- Hits: 1094
With the addition of 3 new models, ITC now has a complete series of Punch/Die sets designed to punch square/rectangular holes in mild steel plate (up to 3.0mm thickness), of the exact dimensions of any of the popular multipole industrial connectors on the market.
Cut-outs made with these die sets guarantee precise and constant dimensions, and the operation is faster, safer than using a drill and/or a saw. No burrs or sharp edges are present along the cuts.
These tool sets, built of high quality steel, must be operated with a (manual or powered) hydraulic press. Only the smallest model (for 21.3x21.3mm or 'size 3') can also be operated mechanically (with a wrench). In all cases, a pre-drill is required for the draw bolt to be inserted. The die set also marks the place of the connector’s mounting screw holes, after the punching operation is completed.
The following models are available from ITC:
-
-
- Part number 502.321, for cutting square holes 21.3x21.3mm (“Size3”)
- Part number 502.322, for cutting rectangular holes 24.3x57mm (“Size15”)
- Part number 502.323, for cutting rectangular holes 24.3x74mm (“Size25”)
- Part number 502.325, for cutting rectangular holes 36x52mm (“Size6”) max. 2mm thickness
- Part number 502.326, for cutting rectangular holes 36x65mm (“Size10”) max. 2mm thickness
- Part number 502.327, for cutting rectangular holes 36x86mm (“Size16”) max. 2mm thickness
- Part number 502.328, for cutting rectangular holes 36x112mm (“Size24”) max. 2mm thickness
-
These punch and die sets are supplied in a plastic case, with draw bolt, nut, manual.
All tools are made in Germany and are covered by a limited warranty of one year.
To download the flyer describing the punch/die sets for rectangular connectors, click here.
To download the complete catalog of ITC punch tools, holes saws and drills, click here.
To download the catalog of ITC multi-pole connectors, click here.
