DC-UPS Power Continuity solutions
- Details
- Category: News
- Published on Friday, 09 April 2021 16:00
- Hits: 1468
ADEL System's DC-UPS series provides a compact, All-in-one solution to your power management needs. These devices series combine several functions into a compact device: power supply unit, power backup (UPS), battery charger and battery care module.
DC-UPS devices automatically distributes power between load and battery. If the system is disconnected from the main power source, the battery will supply power until the battery voltage reaches the minimum recommended voltage per cell, depending on the battery type. This prevents lead-acid batteries from reaching a sulfated state, or deep discharge for other battery types, while ensuring power to the load for as long as possible.
DC-UPS devices automatically detect the battery’s condition and choose the appropriate charging mode. The diagnostics system will continuously monitor the charging progress and indicate faults using the LED light or the status contacts.
- Power supply, back-up (UPS), battery charger and battery care modules in one compact device
- Three charging modes (recovery, boost and float/trickle) and adjustable charging current
- Output: 12VDC, 24VDC and 48VDC
- Power Boost: 2x Nominal current for 4 minutes and 3x Nominal Current for 4 seconds
- Suitable for most common battery types
- Lead-acid: VRLA, AGM, Gel
- Ni-Cd
- Li-Ion, Liithium polymer
- High charging current: charge up to 200 Ah batteries
- Battery and fault diagnostics Output protection: disconnection, polarity, short circuit, overload, battery sulfation / deep discharge
- Included LED indicator
- Contacts for external devices (remote monitoring)
- Input: 90-305Vac
- Materials (housing): Aluminium
- Ingress Protection: IP20
- Mounting: DIN Rail
- Approvals: cURus (UL 60950-1); #E353188
