Cooling Fans
- Details
- Category: News
- Published on Thursday, 17 June 2021 11:54
- Hits: 1437
As the summer arrives, electrical cabinets and enclosures heat up, ITC has a complete line of Cooling fans, vents and accessories to meet your requirements.
Properly selected fans and vents circulate air through the enclosure by drawing in cooler air from the outside and forcing warm air out. Typically the filtered fan is installed near the side bottom of the cabinet so that the incoming air can dissipate the heat produced by the electrical components as it rises. The vent is installed on the opposite side near the top of the cabinet. Finger-guards, rain-hoods and DIN-rail mounted thermostats are available as accessories.
ITC offers fans ranging from 40x40mm to 318x318mm (1.57x1.57" to 12.52x12.52"), and in ranges from 21 to 205 CFM, available for AC and DC.
Features and specifications (filtered fans):
-
-
- MTBF of 40,000 hours; Shielded and self-lubricating ball bearing fans
- Snap-in mounting, no hardware required
- Permanent sealing gasket in polyurethane foam
- Filter media: Filter class G3 according to EN 779, G4 on request, UL900 Class 2 approved and self-extinguishing in F1 Class according to DIN 53438
- Hinged cover for easy filter replacement
- Ingress Protection: IP54; Nema Type 12
-
- Standard colour: Light Grey (RAL 7035)
- Operating temperature: -10 to 60°C (GHV30A… -25 to 50°C)
- Approvals: CSA, cURus
-
To download our Panel Thermal Management catalog, click here.
